Http Configuration Menu - Cisco CP-7970G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-10 Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Call Waiting
Preferences
Call Hold Ringback
Stutter Msg Waiting
Call Logs BLF Enabled Indicates whether BLF for call logs is enabled
Auto Answer
Preferences
Speed Dials
Related Topics
•
•

HTTP Configuration Menu

The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Cisco Unified IP Phones does not support URLs with IPv6 addresses in the URL. This includes hostname
Note
which maps to a IPv6 address for directories, services, messages, and information URLs. If you support
phone usage of URLs, you must configure the phone and the servers that provide URL services with IPv4
addresses.
Table 4-11
OL-23092-01
Description
Indicates whether caller ID blocking is enabled
(Yes) or disabled (No) for the phone.
Indicates whether anonymous call block is
enabled (Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for
each line.
Indicates whether the call hold ringback feature
is enabled (Yes) or disabled (No) for the phone.
Indicates whether stutter message waiting is
enabled (Yes) or disabled (No) for the phone.
(Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether auto
answer is enabled (Yes) or disabled (No) for the
each line.
Displays a sub-menu that displays the lines
available on the phone. Select a line to see the
speed dial label and number assigned to that
line.
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-17
describes the options on the HTTP Configuration menu.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
Device Configuration Menu
To Change
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Use Cisco Unified Communications Manager
Administration.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.
From Cisco Unified Communications Manager
Administration, choose Device > Add a New
Speed Dial.
4-21