Cisco CP-7970G Administration Manual page 140

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Private Line Automated
Ringdown (PLAR)
Privacy
Programmable line keys The administrator can assign features to line
Protected calling
Quality Reporting Tool
(QRT)
Redial
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
5-16
Description
The Cisco Unified Communications Manager
administrator can configure a phone number that
the Cisco Unified IP Phone dials as soon as the
handset goes off hook. This can be useful for
phones that are designated for calling emergency or
"hotline" numbers.
Prevents users who share a line from adding
themselves to a call and from viewing information
on their phone screens about the call of the other
user.
buttons. Softkeys normally control these features;
for example, New Call, Call Back, End Call, and
Forward All. When the administrator configures
these features on the line buttons, they always
remain visible, so users can have a "hard" New Call
key.
Provides a secure (encrypted) connection between
two phones. A security tone is played at the
beginning of the call to indicate that both phones
are protected. Some features, such as conference
calling, shared lines, Extension Mobility, and Join
Across Lines are not available when protected
calling is configured. Protected calls are not
authenticated.
Allows users to use the QRT softkey on a phone to
submit information about problem phone calls.
QRT can be configured for either of two user
modes, depending upon the amount of user
interaction desired with QRT.
Allows users to call the most recently dialed phone
number by pressing a softkey.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For SIP, refer to Cisco
Unified Communications Manager System
Guide, SIP Dial Rules
For SCCP, refer to Cisco Unified
Communications Manager Administration
Guide, Directory Number Configuration
chapter, Configuring PLAR section.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide,
Phone Configuration.
Cisco Unified Communications Manager
•
System Guide,
Cisco Unified Communications Manager
•
Features and Services Guide
Privacy.
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide,
Cisco Unified Communications Manager
•
Administration Guide,
Template Configuration.
For more information about security, see
Overview of Supported Security
For additional information, refer toCisco
Unified Communications Manager Security
Guide, Configuring a Phone Security
For more information refer to:
Cisco Unified Communications Manager
•
System Guide,
Cisco Unified Communications Manager
•
Features and Services Guide,
Report Tool.
Requires no configuration.
Configuration.
Cisco Unified IP
Cisco Unified IP Phones.
Barge and
Cisco Unified IP Phones.
Phone Button
Features.
Profile.
Cisco Unified IP Phones.
Quality
OL-23092-01