Network Configuration - Cisco CP-7970G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-20 Network Configuration Menu Options (continued)
Option
CDP: PC Port
CDP: SW Port
OL-23092-01
Description
Indicates whether CDP is enabled on the PC port (default is
enabled).
Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is connected to
the PC port. CVTA does not work without CDP interaction
with the phone.
When CDP is disabled in Cisco Unified
Note
Communications Manager, a warning is displayed,
indicating that disabling CDP on the PC port prevents
CVTA from working.
The current PC and switch port CDP values are shown on the
Settings menu.
Indicates whether CDP is enabled on the switch port (default
is enabled).
Enable CDP on the switch port for VLAN assignment for
•
the phone, power negotiation, QoS management, and
802.1x security.
Enable CDP on the switch port when the phone is
•
connected to a Cisco switch.
When CDP is disabled in Cisco Unified
Note
Communications Manager, a warning is presented,
indicating that CDP should be disabled on the switch
port only if the phone is connected to a non-Cisco
switch.
The current PC and switch port CDP values are shown on the
Settings menu.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
Device Configuration Menu
To Change
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone.
4-33