Reading Data in Paper Tape
Saves data in paper tape as embroidery data.
• COM1
• COM2
• Tajima
• Barudan
• Zanks (ZSK)
1.
2.
3.
4.
An optional paper taper reader is required for reading data.
Before saving any data, check that the paper tape reader (optional) is connected
to PC correctly. Refer to "Tape Reader" (
Available interfaces are as follows:
Readable data formats of paper tape are as follows:
Turn on the power to the paper tape reader.
Set paper tape after the LED of READ button light up.
Paper tape
Select [Tape
ECS Conversion] from Tool menu.
Select data format and click [OK].
The paper tape reader (optional) starts reading data.
BES-960BC BES-1260BC
Chapter 4 Selecting and Transferring Embroidery Data
page 240) for connecting procedures.
Power switch
READ button
85