Table of Contents
Advertisement
The Printing Preferences dialog box opens.
3. On the Print Setup tab, select a higher quality setting.
4. Print your document again.
5. If the print quality does not improve, try aligning or cleaning the ink cartridges.
For more information on aligning the printhead, see
For more information on cleaning the printhead, see
For additional solutions, go to support.dell.com.
General Guidelines for Selecting or Loading Print Media
Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality.
l
Use only high-quality, copier-grade paper for the best print quality.
l
Avoid paper with embossed lettering, perforations, or a texture that is too smooth or rough. Paper jam may occur.
l
Store paper in its packaging until you are ready to use it. Place cartons on pallets or shelves, not on the floor.
l
Do not place heavy objects on top of the media.
l
Keep paper away from moisture or other conditions that can cause it to wrinkle or curl.
l
Store unused paper at temperatures ranging between 15°C and 30°C (59°F and 86°F). The relative humidity should be between 10% and 70%.
l
During storage, you should use moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating the paper.
l
Avoiding Jams and Misfeeds
You can avoid most jams and misfeeds by following these guidelines:
Ensure that the media is properly loaded in the input tray.
l
Do not overload the input tray.
l
Do not remove media from the input tray while printing.
l
Flex, fan, and straighten the paper before loading.
l
Do not use creased, damp, or curled paper.
l
Orient the media according to the instructions for the printer.
l
Error Messages
Message
Color ink cartridge is low.
Color ink cartridge needs replacing.
Color ink cartridge not recognized.
New updates are available to
optimize your print quality.
Color ink cartridge is not inserted
properly.
Color ink cartridge is not installed.
Running a
Calibration.
Cleaning the
Printhead.
Color Ink Messages
Cause
Ink remaining in color tank is less than 15 percent.
The color ink cartridge has reached its end of life and needs to be
replaced.
Color ink cartridge has an Invalid Manufacturer Code.
Better performance can be achieved with the currently installed ink
cartridges, if a firmware upgrade is performed.
An improper electrical connection to the ink cartridge was detected.
Color ink cartridge is not installed or an incorrect or damaged ink
cartridge is installed.
Black Ink Messages
Action/Solution
Color ink cartridge needs to be replaced soon.
Order for the color ink cartridge.
Install a new Dell approved color ink cartridge for
best results.
Install a new Dell approved color ink cartridge for
best results.
Upgrade your printer's firmware for best results.
NOTE:
Use the Dell Imaging Toolbox to upgrade.
Reinstall the color ink cartridge.
Install a new Dell approved color ink cartridge for
best results.
Advertisement
Table of Contents
