Table of Contents
Advertisement
8. Click Next to go to the enhance window.
9. Click Edit... to enhance the selected photo or click Add... to add more photos to the picture tray.
10. When you finish customizing your settings, click either Save to File... to save the enhanced picture to a new file or Save to save it to the selected file.
NOTE:
Click Cancel to undo the changes made.
11. Click Next > to go to the Finish window.
12. From the Paper size and Print size drop-down lists, select the paper size and print size respectively.
13. Select the number of Copies per pictures you want to print.
14. Select the checkbox Optimize for cutting and Borderless, based on your preference.
NOTE:
Optimize for cutting is available only when the paper size is bigger than print size.
15. When you finish customizing your Print settings, click Print.
Printing Photos From the Application Using the Print Command
1. Turn on your computer and printer, and ensure that they are connected.
2. Load the paper. For more information, see
3. With your photo open, click File® Print.
The Print dialog box opens.
4. Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
The Printing Preferences dialog box opens.
5. On the General, Layout, and Advanced tabs, make any necessary changes for your photo.
6. When you finish customizing your settings, click OK.
The Printing Preferences dialog box closes.
7. Click Print.
Printing Photos From the Operator Panel Menu
1. Turn on your printer.
2. Insert a memory card into the appropriate slot, USB Memory key into the PictBridge connector, or connect a digital camera to the PictBridge/USB
connector.
The last photo is displayed.
NOTE:
USB HDD is not supported by PictBridge connector.
NOTICE:
Do not attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. You can safely remove a card only
when the status light next to the slots is not blinking.
3. Load the paper. For more information, see
4. Press the up Arrow button
5. Press the right Arrow button
6. Press Photo Menu button
Loading
Paper.
Loading
Paper.
to select the number of prints for this photo.
to preview the next photo.
to change the print settings.
Advertisement
Table of Contents
