Insert the ink cartridge into the printhead immediately to prevent any drying of the ink.
7. Slide the ink cartridge into the printhead.
8. Press down the tab until you hear a click and feel the latch snap into position.
9. Close the scanner base unit.
Running a Calibration
Your printer performs a calibration every time you install or replace a printhead. However, you can also run a calibration if you see changes in the image
quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
Calibrating From the Computer
1. Load the main tray or photo tray.
NOTE:
If you do not have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations.