Copy/Move/Delete Saved Jobs; Copying And Saving Jobs To Cd - Xerox 6100BD - Phaser Color Laser Printer System Manual

Copy/move/delete saved jobs

Copying and saving jobs to CD

System Guide
For jobs saved to the local drive, the administrator can copy,
move or deleted the following formats as soon as the job
ticket file exists:
• FRF
• Multipage TIFF
• PDF
DocuSP invokes the Save Facility which calls the Save Job
Library to process the request.
NOTE: Copy/move/delete functions are only for files
specified with the job ticket in the legal job format on the
DocuSP system. These functions can only be performed on
the local disk with the job ticket.
The user interface invokes the necessary scripts to complete
the operation requested.
For jobs saved to a CD-R/W, the Save Facility calls the PM
Library to copy or save the jobs. However, move job is not
supported.
The user can specify CD-RW as the Save Output Destination
in the Queue or Job Properties. The user then browses the
directories to save to the desired location. To improve
performance the images of a job are saved to a temporary
location first and then written to the CD once the last page
has been RIPed.
For systems with a scanner, the user can also select the CD
as a save location.
NOTE: There is no way to delete a file from CD; a user can
only delete all sessions or the last session. Any deleted
sessions cannot be reclaimed for reuse.
NOTE: Writing to a CD requires that the data be supplied at a
constant rate. It is advise to keep activity to a minimum during
high write periods.
Printing
4-15