Printing System Logs; All_Jobs_Log; System_Log; Status_Log - Xerox 6100BD - Phaser Color Laser Printer System Manual

Troubleshooting

Printing system logs

all_jobs_log

system_log

status_log

8-14
System logs gather information to recover various system
problems.
Logs are used to gather second level information on the
operation of the system. These should only be used when
directed by this guide or by the Customer Support Center. All
logs are found in the /opt/XRXnps/log directory. The most
recent entry is at the bottom of the file.
The all_jobs_log contains information about the status of
various tasks associated with processing a job, such as
decomposing, marking, and printing.
The format of the file is as follows:
Logging Module /t# Absolute Time /t# Job ID /
t# Message
The system_log contains information about general high level
system events such as the initialization of software or the
starting of a process.
The format of the file is as follows:
Logging Module /t# Absolute Time /t# Message
The status_log contains information about the attributes of a
job once it has been accepted and tracked by the system.
The attribute information found in this file is as follows (the
sequence and attributes displayed vary with the job):
Logging Module /t# Sender Name /t# Data Size
/t# Document Name /t# Document Format /t# Job
ID /t# Virtual Printer Name /t# Message /t#
Time /t# Network Protocol /t# Assigned
Physical Printer /t# Plex /t# Plex Requested
/t# Disposition
System Guide