Billing Meters - Xerox 6100BD - Phaser Color Laser Printer System Manual

Billing meters

System Guide
• Sample jobs.
• Any partial sets that are generated by a programming
conflict, a PDL error, or a cancellation of a print job by the
operator during printing.
• Blank sides created as part of the job.
Administration pages and sample jobs will be billed as 1-
sided sheets.
Billable events do not include the following:
• Blank sides inserted by the system; for example, the last
page of an odd-numbered 2-sided job.
• Sheets purged by the system for fault recovery or image
quality adjustment.
• Any partial sets generated when the system fault recovery
forces the job to be saved or cancelled during printing.
• Slip sheets.
The Xerox Billing Meter window tracks the time and date of
the last meter read and the following Print Billing Report
options are retained between restarts:
• Queue name for printing the Billing Report.
• Customer ID.
• Machine ID (serial number).
The printing information is pre-loaded and only needs to be
entered once in the system. The customer or service
representative completes the entry and prints the Billing
report. This stores the values. But if the values stored are in
error in some way, they are editable.
Table 0-1. Billing Meters for Regions
Market
Region Billing Meters for Region
Region 1 Meter A: Total impressions to an output destination
(USCO) including Administration Pages.
Meter B: Total impressions for each image of the job up to
and including the last sheet of the 10th set. Does not
include Administration Pages.
Region 2 (RX Meter 1: Total impressions to an output destination
UK) including Administration Pages.
Meter 2: Total impressions printed on sheets wider than 9.
Includes Administration Pages.
Accounting and Billing
7-9