Required Levels Of Expertise; Installing Dsperu On Your Docusp Controller - Xerox 6100BD - Phaser Color Laser Printer System Manual

Required levels of expertise

Installing DSPERU on your DocuSP controller

System Guide
The DSPERU tool was designed to be easy to use. However,
some assumptions have been made regarding the level of
knowledge required to perform various setup, backup, and
recovery tasks.
Setting up the tool for use on a system and performing a
recovery requires some level of comfort with entering UNIX
commands. The commands are not complex, but if you have
no UNIX experience, you may require assistance initially.
To initiate a backup, you must know your system root
password and how to open a Terminal window.
The following levels of expertise are required to perform the
necessary functions:
• Set up DSPERU tool on system: Customer systems
administrator, Xerox system analyst or service
representative.
• Initiate DSPERU backup: Printer operator, customer
system administrator, Xerox analyst or service
representative
• Initiate DSPERU recovery: Customer system
administrator, Xerox system analyst or service
representative
1. Insert the diskette containing the scripts into the diskette
drive.
2. Open a Terminal window and logon as root user.
3. Enter volcheck to mount the diskette.
4. Enter sh /floppy/floppy0/dsperu_setup to launch the
setup script.
5. Eject the diskette by entering cd; eject.
The setup script does the following:
• Creates the directory /export/home/xrxusr/backup.
• Copies the btt file to the /export/home/xrxusr directory.
• Copies the dsp_backup_run and dsp_dump files to the
backup subdirectory.
If DSPERU was previously set up on your system, an error
message may be displayed when it tries to perform the setup
again.
Backup and Restore
2-9