Type 1 And Type 2--Completing The Installation - HP LC2000r - NetServer - 128 MB RAM User Manual

Chapter 8

Type 1 and Type 2--Completing the Installation

1. For either rack type, place four rack nuts on the outside faces of both front
columns for use in mounting the front bezel.
Use the template for your rack type to place rack nuts in the front
columns. You will need these rack nuts in place later in order to
secure the server to the rack columns.
The rack nuts are placed in different positions on the front right-hand
column than they are on the front left-hand column. See Figure 8-11.
Figure 8-11. Place Rack Nuts for Later Use in Securing the Bezel
Mounting the NetServer in a Rack
55