Installing Accessory Boards; Accessory Boards; The I/O Board - HP LC2000r - NetServer - 128 MB RAM User Manual

4 Installing Accessory Boards

Accessory Boards

The HP NetServer accepts PCI and ISA accessory boards connected to the I/O
Board. An accessory board can be identified by the offset of the bracket and the
shape of the edge connector:
Figure 4-1. Accessory Board Identification

The I/O Board

The I/O board contains:
The Remote Management connector, linking the I/O board to the external
connector on the rear panel.
The I/0 Memory slot, which contains cache memory used by the Intel
i960RD I/O processor.
The SE SCSI connector, which services any single-ended SCSI device
installed in the internal (non-hot-swap) trays.
The PCI Board Slots, which are eight connectors that accept PCI boards.
PCI Board- Left-Side Offset
ISA Board- Right-Side Offset
17