Chapter 8
Figure 8-6. Securing Slide to the Front Column
Once you understand how to use the bar nut, use the template (or
count if you no longer have the template) to mark the correct holes for
mounting (on all four columns).
2a.To mount the slides in a Type 1 rack, follow the instructions
titled "Type 1--Locating the Slides" (see Figure 8-7), and
"Type 1--Mounting the Slides" (see Figure 8-8).
2b.To mount the slides in a Type 2 rack, follow the instructions
titled "Type 2--Locating the Slides" (see Figure 8-9), and
"Type 2--Mounting the Slides" (see Figure 8-10).
Mounting the NetServer in a Rack
49