HP LC2000r - NetServer - 128 MB RAM User Manual page 33

Chapter 5
b. Choose a socket into which you want to install a DIMM. DIMMs may
be installed in any combination, in any socket.
c. Spread the two retaining clips on the socket outward.
d. Align the notches on the DIMM with the keys on the socket.
e. Holding the DIMM at 90 degrees to the system board, press the DIMM
fully into the socket until the retaining clips close. If the clips do not
close, the DIMM is not inserted correctly.
5. Repeat step 4 to install all of the DIMMs for your memory configuration.
6. Reinstall the system board in the HP NetServer LH 3r by inserting it into
the chassis guides and pushing it inward as far as it will go. Refasten the
latches to engage the system board with its socket and lock it into place.
7. Replace cover 3. (See Chapter 3, "Removing and Replacing the Covers.")
Installing Additional Memory
25