Locating And Writing Down The Serial Number; Completing Rail Kit Installation; Back Panel - HP ProLiant DL100 G2 Installation Manual

1 2 3
8
Figure 4 Back panel
1
Dual USB ports
2
PS/2 mouse port
3 NIC connectors
(RJ45)(1–2)
4 UID LED
5
Low profile, half length
PCI-X slot

Locating and writing down the serial number

Before completing the installation portion of this guide, locate and write
down the storage server's serial number, which may be needed to access
the HP Data Protection Storage Server Management console later on
during the set up process.
The HP ProLiant Storage Server's serial number is located in three places:
• Top of the storage server
• Back of the storage server
• Inside the storage server shipping box

Completing rail kit installation

Install the server into the rack by following the rail installation instructions
for your server model. These installation instructions are provided in printed
form with your server, on the HP ProLiant Data Protection Storage Server
Documentation CD, or at http://www.hp.com/support/manuals.
For all models of the HP ProLiant DL100 G2 Data Protection Storage
Server, see HP ProLiant 1U Rail installation instructions.
20
Installing the server
4 5 6
10
9
7
6
Full height, full length PCI-X slot
7
AC power connector
8
PS/2 keyboard port
9
Serial port
10
D-sub VGA port
10700