Completing The Installation; Reference Information And Glossary; References - HP ProLiant DL360 Manual

hp ProLiant DL360 generation 3 server high-density deployment technical white paper
IMPORTANT: In Compaq branded 7000-series racks, route the power cables from the servers
to the PDUs through the gap in the rear of the rack rail.
Integrated Lights-Out for Remote Console Management
The remote console management system uses a CAT5 cable connected to the RJ-45 connector in
the Integrated Lights-Out management port. Route this cable according to the instructions in the
Compaq ProLiant DL360 Generation 3 Server Setup and Installation Guide. Connect the CAT5
cable to the network data line outlet.

completing the installation

To complete the installation:
1. Install side panels on the outsides of the end racks.
2. Install the front and rear doors.
3. Connect the PDUs to the power source.
4. Power up the servers.

reference information and glossary

references

Table 15 lists the sources referenced in this document.
Table 15. Sources of Information
Topic
Information focal point for the HP
ProLiant DL360 Generation 3 server
Specifications, options, and a list of
other Compaq products and options
compatible with the ProLiant DL360
Generation 3 server
Installation and service guidelines for
the ProLiant DL360 Generation 3
server
Installation of vertical-mount PDU
brackets and Y-cables
Table 16 lists all the notational abbreviations used for optional components listed in the
document.
Table 16. Notations for Optional Components
Notation
1 x, 2 x, 4 x
2.40 GHz
continued
Where to Find
www.compaq.com/proliant
HP ProLiant DL360 Generation 3 QuickSpecs
www.compaq.com/support/servers/ProLiantDL360 Generation 3.html
HP ProLiant DL360 Generation 3 Setup and Installation Guide
HP ProLiant DL360 Generation 3 Maintenance and Service Guide
Vertical-Mount PDU Brackets with High-Voltage Cables kit, P/N 166097-B21
Description
Number of components, for example, 1 x 256 MB means one 256-MB DIMM
Intel Xeon 2.40-GHz processor
38