10. SUMMARY OF DIP SWITCHES
10. SUMMARY OF DIP SWITCHES
Always turn off the power supply before changing any of the DIP switch settings.
10-1. Front panel DIP switches
The ON/OFF positions of the DIP switches inside the front panel are checked only once when the power is turned on.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
No.
ON/OFF
ON
*1
1
OFF
ON
2
OFF
ON
3
OFF
ON
4
OFF
ON
5
OFF
ON
*3
6
OFF
ON
*2
7
OFF
ON
8
OFF
*1 The version of the PROM is given as "E1" or later.
*2 The version of the PROM is given as "D1" or later.
*3 The version of the PROM is given as "F1" or later.
If the position of DIP switch No. 4 is changed, the production counter will be reset to zero.
* The machine is shipped from the factory with the DIP switches set as follows.
56
Program mode disabled
Program mode enabled
Counting down to zero
Counting up from zero
Pedal 1 operation
Pedal 2 operation
Compatible with normally closed-type emergency stop switch (new)
Compatible with normally open-type emergency stop switch (old)
Upper thread remaining amount = Large
Upper thread remaining amount = Standard
RH-9800
Description
Spare
Spare
Front position
Back position
Spare
Spare
1192Q