Connecting The Power Cord - Brother RH-9800 Instruction Manual

3-12. Connecting the power cord

Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done.
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious
electric shock, and problems with correct operation may also occur.
Do not connect the power cord until installation is complete, otherwise the machine may operate if the start
switch is pressed by mistake, which could result in injury.
Single phase
(1)
Green and yellow wire
(ground wire)
Three phase
(1)
Green and yellow wire
(ground wire)
CAUTION
1. Attach an appropriate plug to the power cord (1). (The
1114Q
green and yellow wire is the ground wire.)
2. Insert the plug into properly-grounded AC power
supply.
Note: Do not use extension cords, otherwise
0839Q
0840Q
RH-9800
machine operation problems may result.
3.INSTALLATION
11