P1. Setting X Correction; P2. Setting Y Correction - Brother RH-9800 Instruction Manual

P1. Setting X correction

(K)
1152Q

P2. Setting Y correction

(K)
1154Q
P3. Setting correction
1
(K)
1156Q
6. USING THE OPERATION PANEL AND FRONT PANEL
1. The setting range is from 1 to 6 in steps of 1.
* Set to a larger value if you would like to move the
eyelet seam to the right (when seen from the
finished side, or the reverse side when sewing).
2. Press the "up" button (L) or the "down" button (K) to
(L)
set the X correction value.
* When the setting value is changed, the value
(N)
displayed will start to flash.
3. Press the ENTER button (N) to accept the X
1153Q
correction setting.
* The display will stop flashing and will start
illuminating steadily.
1. The setting range is from 1 to 6 in steps of 1.
* Set to a larger value if you would like to move the
right-side seam further forward (when seen from
the finished side, or the reverse side when sewing).
(L)
2. Press the "up" button (L) or the "down" button (K) to
set the Y correction value.
* When the setting value is changed, the value
(N)
displayed will start to flash.
3. Press the ENTER button (N) to accept the Y
1155Q
correction setting.
* The display will stop flashing and will start
illuminating steadily.
1. The setting range is from -3 to 3 in steps of 1.
* Set to a larger value if you would like to rotate the
seam which is not part of the eyelet clockwise
(when seen from the finished side, or the reverse
(L)
side when sewing).
2. Press the "up" button (L) or the "down" button (K) to
set the
1
* When the setting value is changed, the value
(N)
displayed will start to flash.
1157Q
3. Press the ENTER button (N) to accept the
correction setting.
* The display will stop flashing and will start
illuminating steadily.
RH-9800
correction value.
1
25