Brother RH-9800 Instruction Manual page 32

6. USING THE OPERATION PANEL AND FRONT PANEL
P4. Setting correction
2
(K)
1158Q
26
1. The setting range is from -3 to 3 in steps of 1.
* Set to a larger value if you would like to rotate the
eyelet seam clockwise (when seen from the
finished side, or the reverse side when sewing).
(L)
2. Press the "up" button (L) or the "down" button (K) to
set correction value.
2
* When the setting value is changed, the value
displayed will start to flash.
(N)
3. Press the ENTER button (N) to accept the
1159Q
correction setting.
* The display will stop flashing and will start
illuminating steadily.
RH-9800
2