Table of Contents
Advertisement
3. INSTALLATION
Machine installation should only be carried out by
a qualified technician.
Contact your Brother dealer or a qualified electrician
for any electrical work that may need to be done.
The sewing machine weighs more than 87 kg. The
installation should be carried out by two or more
people.
Do not connect the power cord until installation is
complete, otherwise the machine may operate if
the start switch is pressed by mistake, which could
result in injury.
3-1. Table processing diagram
Use the special table indicated below.
Thread trimmer
Upper thread trimmer
Upper and lower thread trimmer
If using a commercially-available table, process it as shown in the illustration below.
Note: The thickness of the table should be at least 50 mm, and it should b e strong enough to bear the weight and
vibration of the sewing machine.
CAUTION
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not
excessively bend the cords or secure them too
firmly staples, otherwise there is the danger that
fire or electric shocks could occur.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Install the belt covers to the machine head and
motor.
Product code
127-980-000-01
127-980-001-01
RH-9800
3.INSTALLATION
2011Q
3
Hide quick links:
Advertisement
Table of Contents
