Checking The Direction Of Machine Operation - Brother RH-9800 Instruction Manual

5-3. Checking the direction of machine operation

(3)
(7)
(9)
1122Q
1. Turn the upper shaft pulley (1) toward you until the mark (A) on the pulley (1) is aligned with the notch in the cover (2).
2. Press the power switch (3) to turn on the power.
The power indicator will illuminate and the TROUBLE indicator will flash.
3. Press the RESET button (4).
The TROUBLE indicator will switch off and the feed bracket (5) will move to the cloth setting position.
4. Press the MODE button (6) to switch to automatic mode.
The AUTO mode indicator will illuminate.
5. Depress the cloth presser switch (7).
The cloth presser (8) will be lowered.
6. Depress the start switch (9).
The machine will sew one buttonhole and will then stop.
* If the buzzer makes a beeping sound and "E-89" appears on the front panel display, the direction of operation of the
upper shaft is reversed.
Press the power switch (3) to turn the power off, and then switch over the top and bottom motor connectors (10).
7. The direction of machine operation will now be correct.
(2)
(5)
RH-9800
0862Q
(A)
(1)
(4)
(8)
1116Q
5. CORRECT USE
1124Q
(6)
(10)
1123Q
15