Connected Targets Tab - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

5. Select the Connected Targets tab, and then click the Toggle Start-Up button for each target listed
so the targets start automatically
Figure 47 Connected Targets tab
.
Installing and configuring the iSCSI driver for Red Hat 5
NOTE:
The iSCSI driver package is included but is not installed by default. Install the package
iscsi initiator utils during or after operating system installation.
To install and configure the iSCSI driver for Red Hat 5:
1. Use the iscsiadm command to control discovery and connectivity:
# iscsiadm –m discovery –t st –p 10.6.0.33:3260
2. Edit the initiator name:
# vi /etc/iscsi/initiatorname.iscsi
3. Start the iSCSI service:
# service iscsi start
(Figure 47).
MPX200 Multifunction Router 69