Set Fc - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

set fc

Sets the port status and programmed connection status
Session: admin
Example:
MPX200 (admin) #> set fc
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring FC Port: 1
-------------------------
Port Status (0=Enable, 1=Disable)
Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb, 8=8GB)
Frame Size (0=512B, 1=1024B, 2=2048B)
Execution Throttle (Min=16, Max=65535)
All attribute values for Port 1 that have been changed will now be saved.
Configuring FC Port: 2
-------------------------
Port Status (0=Enable, 1=Disable)
Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb, 8=8GB)
Frame Size (0=512B, 1=1024B, 2=2048B)
Execution Throttle (Min=16, Max=65535)
All attribute values for Port 2 that have been changed will now be saved.
[Enabled ]
[Auto ]
[2048 ]
[256 ]
[Enabled ]
[Auto ]
[2048 ]
[256 ]
MPX200 Multifunction Router 301