HP StorageWorks 6100 - Enterprise Virtual Array User Manual page 225

sysTempMon: Power for
152133
Left PCM Plugged-in
sysTempMon: Power for
152134
Left PCM Un-plugged
sysTempMon: Power for
152135
Right PCM Plugged-in
sysTempMon: Power for
152136
Right PCM Un-plugged
sysTempMon: Slot 1 (R1)
152137
PCM Fan%d faulty
sysTempMon: Slot 2 (R2)
152138
PCM Fan%d faulty
sysTempMon: Slot 1 (R1)
152139
PCM Fan%d healthy
sysTempMon: Slot 2 (R2)
152140
PCM Fan%d healthy
sysTempMon: Over Temperat-
152141
ure Front: %dC Rear: %dC
CPU1: %dC CPU2: %dC
sysTempMon: Setting the
152142
fan speed to high
sysTempMon: Setting the
152143
fan speed to normal
sysTempMon: Temperature
back to safe value.
152144
Front: %dC Rear: %dC
CPU1: %dC CPU2: %dC
sysTempMon: Critical Tem-
perature, Shutting Down
152145
Front: %dC Rear: %dC
CPU1: %dC CPU2: %dC
QL3022:ql3xxx_probe: Ad-
200721
apter eth#%d, Invalid NV-
RAM parameters
"memory monitor: Detected
Uncorrectable Ecc %08lx
233473
system is rebooting in 5
secs\n"
"Failed to register inter-
233474
rupt handler!\n"
"%s class_simple_create
233475
failed\n"
User Info Left PCM is connected AC power.
Left PCM is not connected to AC power (un-
User Info
plugged).
User Info Right PCM is connected AC power.
Right PCM is not connected to AC power (un-
User Info
plugged).
User Info Left PCM (#1) is reporting a faulty fan.
User Info Left PCM (#1) is reporting a healthy fan.
User Info Right PCM (#2) is reporting a faulty fan.
User Info Right PCM (#2) is reporting a healthy fan.
Router has detected an over temperature,
User Info
Front: %dC Rear: %dC CPU1: %dC CPU2: %dC.
User Info Fan(s) speed has been set to high.
User Info Fan(s) speed has been set to normal.
Router temperature has returned to normal
operating range, Front: %dC Rear: %dC CPU1:
User Info
%dC CPU2: %dC.
Router has reached a critical temperature ad
is shutting down, Front: %dC Rear: %dC CPU1:
User Info
%dC CPU2: %dC.
A GE port (eth#%d) has invalid NVRAM
TOE Fatal
parameters.
Sys- Uncorrectable memory error detected at ad-
Fatal
tem dress provided in log message.
Sys-
Fatal Attempt to register the interrupt handler failed.
tem
Failed class_simple_create system call
Sys-
Fatal
tem
from memory monitor initialization routine.
MPX200 Multifunction Router 225