Mpx200 Ports And Leds - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Hp storageworks mpx200 multifunction router user guide (5697-0306, january 2010)
Hide thumbs Also See for StorageWorks 6100 - Enterprise Virtual Array:
Table of Contents

Advertisement

3.
Verify that the heartbeat LED is blinking (once per second) and that the System fault LED does
not light.
Figure 73
Input fault LED
System power LED
Heartbeat LED
HP StorageWorks
MPX200
IOIOI
MGMT
Management port
10/100/1000
Ethernet
RS-232 port
Figure 73 MPX200 ports and LEDs
.
NOTE:
See the
MPX200 chassis
indicators.
4.
Connect to the MPX200 from your management workstation as follows
a.
Enter guest at the Login prompt.
b.
Enter password at the Password prompt.
NOTE:
HP recommends that you change the MPX200 guest password after logging in.
5.
Enter Blade n at the mpx200#> prompt, where n is the number of the blade in the chassis
being configured.
6.
Enter admin start at the mpx200 <n> prompt, where n is the number of the blade currently
selected in the chassis.
7.
Enter the default password config.
NOTE:
HP recommends that you change the MPX200 config password after logging in.
122
MPX200 FCIP
shows the location of the ports and LEDs on the MPX200.
1 GbE iSCSI
ports
GE4
GE3
1 GbE Blade
MPX200 Multifunction Router
FC1
FC2
UID beacon
LED (blue)
Maintenance
button
8 Gb/s FC ports
diagnostics" on page 127 for a description of the LED fault
GE1
GE2
1 GbE iSCSI
ports
26531a
(Figure
74).

Advertisement

Table of Contents
loading

Table of Contents