Setting Up The Iscsi Ip Ports; Iscsi Controller Properties: Mgmt Port Tab - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Hp storageworks mpx200 multifunction router user guide (5697-0306, january 2010)
Hide thumbs Also See for StorageWorks 6100 - Enterprise Virtual Array:
Table of Contents

Advertisement

Figure 16 iSCSI controller properties: Mgmt Port tab
.

Setting up the iSCSI IP ports

Each iSCSI IP port must have an IP address—IPv4, IPv6, or both. Set the IP address on the IP Ports
tab on the iSCSI Controller Properties page (see
Figure
17).
NOTE:
A target portal is created for each IP address that you set.
MPX200 Multifunction Router
37

Advertisement

Table of Contents
loading

Table of Contents