Creating A Data Migration Job Group In The Cli; Using The Data Migration Wizard; Starting The Data Migration Wizard - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

3. In the Input dialog box, enter a group name that you want to assign to administer a set of data
migration jobs, and then click OK.
4. In the Security Check dialog box, enter the data migration user password (default is migration),
and then click OK.

Creating a Data migration job group in the CLI

The data migration group name must be a minimum of 4 and a maximum of 128 alphanumeric
characters. You can create a maximum of eight job groups in addition to the default job group.
To create a data migration job group in the CLI:
1. Log in to the MPX200 as guest and enter the password.
2. Open a miguser session using the following command (the default password for misguser is
migration.):
miguser start -p migration
3. Create a migration group using the following command:
migration_group add
4. At the prompt, enter a name for the new group.
The following shows an example of how to add a migration group in the CLI.
MPX200 (miguser) #> migration_group add
Please Enter Group Name that you want to create (Min = 4 Max = 128
characters) MS_Exchg_2
Sucessfully created Group MS_Exchg_2

Using the Data Migration Wizard

The Data Migration wizard helps simplify the configuration and scheduling of both individual and
batches of data migration jobs.

Starting the Data Migration Wizard

Follow these steps to start the data migration wizard:
1. Start the mpx Manager and connect to the MPX200 by providing the IP address of the MPX200.
2. Start the Data Migration wizard using one of these methods:
• From the Wizards menu, click Start Data Migration.
• In the left pane, open the Services page and then right-click Data Migration Jobs.
MPX200 Multifunction Router 263