Power Cord - HP StorageWorks 6100 - Enterprise Virtual Array User Manual
Hp storageworks mpx200 multifunction router user guide (5697-0306, january 2010)
Hide thumbs
Also See for StorageWorks 6100 - Enterprise Virtual Array:
- User manual (462 pages) ,
- User manual (232 pages) ,
- User manual (186 pages)
Table of Contents
Advertisement
5.
Route the power cord:
a.
Starting from the front of the rack, connect the power cord to the MPX200.
b.
For the left blade, the cord by following the gap between the chassis and the chassis rail
(Figure
10).
c.
Repeat for the right blade.
NOTE:
The right blade requires the power cord to extend approximately 12 in. (30 cm) beyond
the front edge, due to the positioning of the socket on the PCM.
1. Power cord
Figure 10 Power cord
.
MPX200 Multifunction Router
31
Advertisement
Table of Contents
Troubleshooting
