HP StorageWorks 6100 - Enterprise Virtual Array User Manual page 221

#%d: QLWriteFlashDword:
107984
Write fails at addr 0x%x
data 0x%x
#%d: QLGetVpDatabase:
108032
MBOX_CMD_GET_VP_DATABASE
for VP %d fatal error
#%d: QLGetVpDatabase:
108033
MBOX_CMD_GET_VP_DATABASE
for VP %d failed %x
#%d: QLVerifyMenloFw: EX-
108049
ECUTE_COMMAND_IOCB failed
MB0 %x MB1 %x
#%d: QLVerifyMenloFw: EX-
108050
ECUTE_COMMAND_IOCB fatal
error
#%d: QLGetFwState: Get
108064
Firmware State failed 0-
3 %x %x %x %x
#%d: QLIoctlDisable: Re-
118882
set adapter
#%d: QLIsrEventHandler:
119088
LIP occurred (%x): mail-
box1 = %x
#%d: QLIsrEventHandler:
119089
LIP reset occurred (%x):
mailbox1 = %x
#%d: QLIsrEventHandler:
119090
Link up (%x) mailbox1 =
%x
#%d: QLIsrEventHandler:
119092
Link mode up (%x):
RunTimeMode=%x
#%d: QLIsrEventHandler:
119093
RSCN update (%x) rsc-
nInfo: %x
#%d: QLIsrEventHandler:
119097
Port update (%x) mb1-3 %x
%x %x
139265
QBRPC_Initialize: Entered
QBRPC_Initialize:Get-
139266
Bridge Mem Allocation er-
ror
FC controller failed a Flash write (address x
FC Error
data x).
FC controller failed the Get VP Database
FC Error
command (for virtual port %d).
FC controller failed the Get VP Database
FC Error
command (for virtual port %d) with status x.
FC controller reported failure status for an Ex-
FC Error ecute IOCB (input/output control block) com-
mand.
FC controller reported a fatal error while pro-
FC Error
cessing an Execute IOCB command.
FC controller reported failure status for a Get
FC Error
Firmware State command.
Request to reset the FC processor (adapter)
FC Info
received from IOCTL interface.
FC loop initialization process (LIP) occurred.
FC Info The LIP type is reported, as is the contents of
the FC processor's mailbox 1 register.
FC LIP reset occurred. The LIP reset type is re-
FC Info ported, as is the contents of the FC processor's
mailbox 1 register.
FC link up occurred. Event status is reported,
FC Info as is the contents of the FC processor's mailbox
1 register.
FC link up occurred. Event status is reported,
FC Info as is the RunTimeMode (0 = loop, 1 = point-
to-point).
An RSCN was received. Event status is repor-
FC Info
ted, as is the RSCN information.
FC port update. Event status is reported, as is
FC Info the contents of the FC processor's mailbox 1,
2, and 3 registers.
RPC (remote procedure call) server initializa-
User Error
tion entry point.
User Error Get System API memory allocation failed.
MPX200 Multifunction Router 221