Connected Targets Tab - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual
Hp storageworks mpx200 multifunction router user guide (5697-0202, february 2010)
Hide thumbs
Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
- User manual (150 pages) ,
- Software manual (86 pages) ,
- Reference manual (48 pages)
Table of Contents
Advertisement
5.
Select the Connected Targets tab, and then click the Toggle Start-Up button for each target listed
so the targets start automatically
Figure 50 Connected Targets tab
.
Installing and configuring the iSCSI driver for Red Hat 5
NOTE:
The iSCSI driver package is included but is not installed by default. Install the package
iscsi initiator utils during or after operating system installation.
To install and configure the iSCSI driver for Red Hat 5:
1.
Use the iscsiadm command to control discovery and connectivity:
# iscsiadm –m discovery –t st –p 10.6.0.33:3260
2.
Edit the initiator name:
# vi /etc/iscsi/initiatorname.iscsi
3.
Start the iSCSI service:
# service iscsi start
(Figure
50).
MPX200 Multifunction Router
73
Advertisement
Table of Contents
Troubleshooting
