Commands; Admin - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

• Commands for configuration tasks are available only in an Admin session. An account must have
admin authority to execute the admin start command, which opens an Admin session (see

admin

command).

Commands

This section lists and describes the MPX200 CLI commands in alphabetical order. Each command
description includes syntax, keywords, notes, and examples.
Admin
Opens or closes an administrator (Admin) session. You must be in an Admin session to execute
commands that change the router configuration. An inactive Admin session times out after 15 minutes.
Authority
Syntax
Keywords
NOTE:
Closing a Telnet window during an Admin session does not release the session. When using Telnet,
you must either wait for the Admin session to time out, or use the admin cancel command.
Example: The following example shows how to open and close an Admin session:
MPX200 <1>#> admin start
Password : ******
MPX200 <1> (admin) #>
.
.
.
MPX200 <1> (admin) #> admin end
MPX200 <1> #>
142 Command referencecommand reference
Admin session
start (or begin)end (or stop)cancel
admin
start (or
Opens the Admin session.
begin)
end (or Closes the Admin session. The logout, shutdown, and
reset commands also end an Admin session.
stop)
Terminates an Admin session opened by another user. Use
this keyword with care because it terminates the Admin
cancel
session without warning the other user and without saving
pending changes.