Tools You Need; Documents You May Need - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 1

Tools You Need

The following materials are also required to install this upgrade:
Anti-static Service Kit (3M part number 8501/8502/8505 or equivalent)
containing a wrist strap, anti-static mat, and cable. Use this kit to prevent
damage to the system from static electricity.
®
T15 Torx driver
T25 Torx driver (required for systems mounted in HP racks)
HP NetServer Navigator CD-ROM (used for RAID configuration)

Documents You May Need

Refer to the following documents supplied with your HP NetServer:
HP NetServer LH 3000/3000r Installation Guide
HP NetServer LH 6000/6000r Installation Guide
Integrated HP NetRAID Controller Configuration Guide
The HP NetServer Ultra2 SCSI Hot-swap Hard Disk Drive and Tray User Guide
is supplied with accessory Ultra2 SCSI hot-swap hard disk drives and trays.
The HP NetServer Duplex Board Installation Guide is supplied with the kit used
to install a duplex board.
For an HP NetServer installed in a Compaq rack, refer to the Installation Guide
®
for Compaq 4000/7000 Racks for your HP NetServer.
The HP NetServer Online Documentation CD-ROM contains all of the documents
listed above.
Introduction
5