Introduction; About This Guide - HP D7171A - NetServer - LPr Upgrade Manual

1 Introduction

About This Guide

This guide contains instructions for installing an accessory second hot-swap mass
storage cage into your HP NetServer LH 3000 or LH 3000r, or your LH 6000 or
LH 6000r. The HP NetServer LH 3000 and the HP NetServer LH 6000 are the
floor-standing pedestal configurations, and the HP NetServer LH 3000r and the
HP NetServer LH 6000r are the rack-optimized configurations, as shown in Figure
1-1.
HP NetServer LH 3000 & LH 6000
Pedestal Configuration
NOTE If you plan to install a duplex board on the second hot-swap
mass storage cage, do so before you install the cage. Refer to
HP NetServer Duplex Kit Installation Guide for instructions.
Figure 1-1. HP NetServer Configurations
HP NetServer LH 3000r & LH 6000r
Rack-mount Configuration
1