Chapter 2
Cabling to I/O Baseboard SCSI B
To connect the secondary mass storage cage to the SCSI B connector on the I/O
baseboard, install the SCSI cable supplied with the kit as follows:
1. Carefully pull aside the cables for the flexible disk drive and CD-ROM
drive to gain access to the SCSI B connector on the I/O baseboard, which
is shown in Figure 2-6. Handle these cables carefully to avoid accidentally
disconnecting them.
Figure 2-6. Connect SCSI Cable to I/O Baseboard's SCSI B Connector
Installation
SCSI A Connector
SCSI Cable
SCSI B Connector
15