Precautions - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 1

Precautions

Follow the procedures listed below to ensure safe handling of components and to
prevent harm to both you and the HP NetServer:
WARNING Hazardous voltages and high energy levels are present inside
the HP NetServer. ALWAYS disconnect the AC power
cord(s) from the NetServer before removing the cover.
Serious injury may result if this warning is not observed.
WARNING
To prevent the rack from tipping over, extend the anti-tip foot
or attach the anti-tip feature before extending the
HP NetServer from the rack. Also lower the leveler feet of the
rack to improve stability and to prevent the rack from rolling.
Failure to use the anti-tip foot or feature and the leveler feet
could result in serious injury.
CAUTION This accessory is sensitive to static electricity and can easily
be damaged by improper handling. Use of a grounding strap is
recommended. Read the following information carefully
before you handle the accessory:
Leave the accessory in the anti-static container until you
are ready to install it.
Use an anti-static service kit, such as 3M
or equivalent.
Before you remove the accessory from the anti-static
container, touch a grounded, unpainted metal surface on
the system to discharge static electricity.
Introduction
®
8501/8502/8505
3