Firmware Upgrade; Schedule Power On/Off - Thecus N16000 Series User Manual

Notification Configuration
Item
Beep Notification
Email Notification
Authentication Type
SMTP Server
Port
SMTP Account ID
Account Password
Log Level
Sender's E-mail
Address
Receiver's E-mail
Address (1,2,3,4)
NOTE

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING

Schedule Power On/Off

Using the Thecus IP storage System Management, you can save energy and money
by scheduling the Thecus IP storage to turn itself on and off during certain times of
the day.
From the menu, choose the Schedule Power On/Off item and the Schedule
Power On/Off screen appears.
To designate a schedule for the Thecus IP storage to turn on and off, first enable the
feature by checking the Enable Schedule Power On/Off checkbox.
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Select the SMTP Server account authentication type.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Set the SMTP Server Email account ID.
Enter a new password.
Select the log level to send the e-mail out.
Set email address to send email.
Add one or more recipient's email addresses to receive email
notifications.
Consult with your mail server administrator for email server
information.
to find the firmware file.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.
35