Uninterrupted Power Source
From the External Devices menu, choose the Uninterrupted Power Source
item and the UPS Setting screen appears. Make any changes you wish, and press
Apply to confirm changes.
See the following table for a detailed description of each item.
UPS Setting
Item
UPS Monitoring
Remote UPS Monitoring
Remote UPS IP
Manufacturer
Model
Battery Status
Power
Seconds between power failure and
first notification
Seconds between subsequent power
Description
Enable or disable UPS monitoring.
Enable or disable Remote UPS monitoring.
Input the IP address of the NAS that the UPS device
is connected to via USB or RS232.
Choose the UPS manufacturer from the dropdowns.
Choose the UPS model number from the
dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the
UPS
Delay between power failure and first notification in
seconds.
Delay between subsequent notifications in seconds.
119