Firmware Upgrade - Thecus 8900 series User Manual

Notification Configuration
Item
Beep Notification
Email Notification
Authentication Type
SMTP Server
Port
SMTP Account ID
Account Password
Log Level
Sender's E-mail
Address
Receiver's E-mail
Address (1,2,3,4)
NOTE

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The buzzer will beep and the Busy LED will blink until the upgrade is
complete.
NOTE
Description
Enable or disable the system buzzer that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Select the SMTP Server account authentication type.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Set the SMTP Server Email account ID.
Enter a new password.
Select the log level to send the e-mail out.
Set senders email address to send email notifications.
Add one or more recipient's email addresses to receive email
notifications.
Consult with your mail server administrator for email server
information.
to find the firmware file.
• The buzzer only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
60