Raid Information - Thecus N16000 Series User Manual

Test Type
Test Result
Test Time
NOTE
Bad Block Scan
On the Disks Information screen, you may also perform disk bad block scan,
simply to click "Click to start" to start with. The result is only for reference and
system will not take any action from its result.
The testing result will be stay till system reboot with "Yet to start" displayed as
default.

RAID Information

From the Storage menu, choose the RAID item and the RAID Information screen
appears.
This screen lists the RAID volumes currently residing on the Thecus IP storage. From
this screen, you can get information about the status of your RAID volumes, as well
as the capacities allocated for data.
remapped. If this attribute value remains at zero, it indicates that
the quality of the corresponding surface area is low.
Set short or long time to test.
Result of the test.
Total time of the test.
If the Reallocated Sector Count > 32 or Current Pending Sector of a hard disk
drive > 0 , the status of the disk will show "Warning". This warning is only used
to alert the system administrator that there are bad sectors on the disk, and
they should replace those disks as soon as possible.
47