RAID
X
6
NAS Stacking
The Thecus IP storage's capacity can be expanded even further using the stackable
function. With it, users can expand the capacity of their network storage systems up
to 5 other stack target volumes which are located in different systems. These can be
stacked through single network access like SMB or AFP acting as a share folder type.
From the main menu, the stackable feature is located under "Storage". Please refer
the figure below for reference.
A. Add a Stack Target Volume
From the figure above, click Add to access the stackable target device configuration
page. Please refer to the figure below:
X
59
[RAID 6] HDDx4 to [RAID 6] HDDx5
[RAID 6] HDDx4 to [RAID 6] HDDx6
[RAID 6] HDDx4 to [RAID 6] HDDx7
[RAID 6] HDDx4 to [RAID 6] HDDx8
......................................HDDx16
[RAID 6] HDDx5 to [RAID 6] HDDx6
[RAID 6] HDDx5 to [RAID 6] HDDx7
[RAID 6] HDDx5 to [RAID 6] HDDx8
......................................HDDx16
[RAID 6] HDDx6 to [RAID 6] HDDx7
[RAID 6] HDDx6 to [RAID 6] HDDx8
......................................HDDx16
[RAID 6] HDDx7 to [RAID 6] HDDx8
......................................HDDx16