Thecus N16000 Series User Manual page 39

Once the system has rebooted, you will be returned to the File System Check
prompt. There you will see the available RAID volumes to run the file system check.
Check the desired RAID volumes and click Next to proceed with the file system
check. Click Reboot to reboot without running the check.
Once you click Next, you will see the following screen:
Click Start to begin the file system check. Click Reboot to reboot the system.
When the file system check is run, the system will show 20 lines of information until
it is complete. Once complete, the results will be shown at the bottom.
39