Chapter 5: Tips And Tricks; Usb And Esata Storage Expansion; Remote Administration - Thecus N16000 Series User Manual

failure notifications
Shutdown the system when the
battery charge is less than
Apply

Chapter 5: Tips and Tricks

USB and eSATA Storage Expansion

The Thecus IP storage supports external USB hard disks through its USB ports. Once
a USB hard disk has successfully mounted, the entire volume will be linked
automatically to the default USB HDD folder. The Thecus IP storage supports USB
external storage devices. All file names on the USB disk volume are case sensitive.
The Thecus IP storage also supports eSATA hard disks with its eSATA port.
Before attaching an eSATA or USB disk drive to Thecus IP storage, you have to
partition and format it on a desktop computer or a notebook first. The attached
device will be located at \\192.168.1.100\usbhdd\sd(x)1 where 192.168.1.100
means the IP address of Thecus IP storage and sd(x)1 stands for the first partition
on the eSATA or USB disk drive.

Remote Administration

You can set up your Thecus IP storage for remote administration. With remote
administration, you can access your Thecus IP storage over the Internet, even if
your Thecus IP storage is behind a router. This is especially useful if you are
traveling and suddenly need a file from your Thecus IP storage.
Setting up remote administration is a three-part process, and will require the
following equipment:
Thecus IP storage device

Cable / DSL Router with Dynamic DNS support

Home PC

Internet Connection

NOTE
Amount of UPS battery remaining before system
should auto-shutdown.
Press Apply to save your changes.
Router setup will differ slightly depending on router used. For this example,
we will use the Asus WL500g because it has support for Dynamic DNS.
Contact your router hardware vendor for setup help.
120