Thecus N16000 Series User Manual page 64

After your changes have been made, click Apply to confirm any modifications. Once
changes are applied, the associated information will be updated on the Stack
Target List window.
D. Stack Target ACL
If the stack target Public setting set to Yes, then the ACL button will be grayed out.
However, if Public setting is set to No, then the ACL button will be available for you
to setup user access permissions for the stack target.
ACL settings will be exactly the same as system folder that you may have setup
previously.
E. Reconnect a Stack Target
The enabled stack target devices may be disconnected by situations such as power
outages or network disconnects. When this happens, the Reconnect button will
available. To attempt to reconnect the stack target, click Reconnect.
64