Firmware Upgrade; Ups Setting - Thecus N0503 User Manual

Notification Configuration
Item
Beep Notification
Email Notification
SMTP Server
Port
Auth Type
SMTP Account ID
Account Password
E-mail From
Receiver's E-mail
Address (1,2,3,4)
NOTE

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING

UPS Setting

The Thecus IP storage can also support various uninterruptible power supply unit
via either "Serial" or "USB" interface (depend on model) to provide extra data
security and accessibility in the case of a power failure.
From the Status menu, choose the UPS item and the UPS Setting screen appears.
Make any changes you wish, and press Apply to confirm changes.
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Select the SMTP Server account authentication type.
Set the SMTP Server Email account ID.
Enter a new password.
Set email address to send email.
Add one or more recipient's email addresses to receive email
notifications.
Consult with your mail server administrator for email server
information.
to find the firmware file.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.
46