Thecus N16000 Series User Manual page 90

User can access this newly create HA system by its virtual IP, take Windows as
example by put 172.16.65.87 or HApm then the available share will be listed as
below:
HA Recovery:
If one of HA member is went down earlier and like to recovery afterward. Simply go
to the RAID management page and the "HA Recovery" icon is available.
Click on "HA Recovery" icon then system will prompt the box to require Active server
heartbeat link IP address. After input the IP address and press Apply, the unit will be
recovery fully.
The other circumstance is while HA enable button has checked, but system has
detected it has previous HA configuration existed. Then the screen will prompt
message box as below:
90