Thecus N16000 Series User Manual page 87

Ip storage server
Hide thumbs Also See for N16000 Series:
Table of Contents

Advertisement

Setup Standby unit for HA, take example unit PMS (172.16.66.24):
x.
Login in to web UI of system 172.16.66.24 then go to "High Availability" HA
configuration page under Storage category.
xi.
Click on "Enable" radio button then setting page will appear.
xii.
Choose the server role of associated system, we are having example to have
this unit as "Standby Server". So "Standby Server" has checked. Then carry
on to filled in associated "Active Server" IP address.
xiii.
Click "Apply" and the Standby unit will start to check the Active sever status.
If the Active server has replied correctly then the message will appear as
below.
Please now check the Active Server unit and the interactive message will also
appear to reboot both "Active" and 'Standby" server together to complete
High Availability settings.
The last state of Active server is waiting for Standby server as screen shot
below:
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8900 seriesN12000 seriesN2800N4800

Table of Contents