For the ACL restore,
it could be restored in same system or used in other unit. For example, restore the
ACL backup file to other unit. This unit has RAID volume "RAIDpm" with share folder
as listed on right hand screen shot.
After input the ACL backup file and click "Next" button, system will come out the
screen to list matched folders in between backup file and this RAID volume. Just
select the desired folders for ACL restore.
NOTE
Thecus Backup Utility
The Thecus Backup Utility is on your Installation CD. When you click on the CD, the
Backup Utility will be installed under Program Groups > Thecus > Thecus
• The ACL backup will only backing the share folder level, no apply to
its sub-layer.
• The ACL backup/restore can be used among ext3/ext4/XFS file
system but ZFS can only be used with other RAID volume with ZFS
file system created while backup/restore.
• If recursive has been checked during ACL restoration, it will apply all of
its sub-folder with same permission.
112