Securelinx Network Commands; Date And Time - Lantronix SecureLinx SLC8 User Manual

2. Enter the following fields.
SecureLinx
Network Search
IP Address
3. If you entered an IP address, click the Add IP Address button. The IP address displays in the
IP Address List.
4. Repeat steps 2 and 3 for each IP address you want to add.
5. To delete an IP address from the IP Address List, select the address and click the Delete IP
Address button.
6. Click the Apply button. When the confirmation message displays, click SecureLinx Network
on the main menu. The SecureLinx Network page displays the SecureLinx devices resulting
from the search. You can now manage these devices.

SecureLinx Network Commands

The following CLI commands correspond to the SecureLinx Network page. For more information,
see 15: Command
set slcnetwork (on page 245)

show slcnetwork (on page 245)


Date and Time

You can specify the current date, time, and time zone at the SLC location (default), or specify NTP
to synchronize with other NTP devices on your network.
To set the local date, time, and time zone or enable NTP:
1. From the main menu, select Date & Time.
SecureLinx SLC User Guide
Select the type of search you want to conduct.
Local Subnet: Performs a broadcast to detect SecureLinx devices on the local
subnet.
Manually Entered IP Address List: Provides a list of IP addresses that may not
respond to a broadcast because of how the network is configured.
The default is Both.
If you selected Manually Entered IP Address List or Both, enter the IP address
of the SecureLinx device you want to find and manage.
Reference.
Figure 7-7 shows the page that displays.
7: Services
71